Electro Voice Q1212 2x 1200 Watt / 4 Ohm

(1)

Товар: PAH0008259-000

Electro Voice Q1212 2x 1200 Watt / 4 Ohm Изображение товара

Продано!

Список товаров для сравнения
Рекомендовать

Information on the disposal of old devices

With 2 x 1200 W @ 4 Ohms and 2 x 1800 W @ 2 Ohms, the Q1212 offers the horsepower to challenge the legendary P3000. It provide... Вся информация о товаре

Этот товар больше недоступен!

Найти альтернативу или продукт-преемникa...

Самый посещаемый музыкальный магазин в Европе. На 22.000 м² торговых и логистических площадей.

export-ru@musicstore.com+49 (0)221 / 88 84 - 1690

БОЛЕЕ 3000 ВИДЕО
ПРЕЗЕНТАЦИЙ ТОВАРОВ
УДОБНЫЙ ВОЗВРАТ
ТОВАРА
3 ГОДА
ГАРАНТИИ
55.000 ТОВАРОВ
ГОТОВЫ К ОТПРАВКЕ

Информация о продукте Q1212 1800 W per channel Class-H power amplifier

The Electro-Voice Q Series Q1212 Power Amplifier delivers 2 x 1200W @ 4 Ohms / 2x 1800W @ 2 Ohms and provides flexible drive capability for a huge variety of speaker systems, including Phoenix, Tour X, and ZX3/ZX5 etc.

The Electro-Voice Q1212 Power Amplifier features Switchable LPN(Low-Pass Notch) filter circuitry, providing extra tonal fundament and kick, with protective Low-Cut for using smaller passive 12" or 15" cabinets without additional subwoofers.

The Electro-Voice Q Series Q1212 Power Amplifier Main Features Include:

Maximum midband output power: 1800W @ 2 ohms, 1200W @ 4 ohms, 750W @ 8 ohms (THD = 1%, 1 kHz, Dual-channel)
Rated output power: 1100W @ 4 ohms, 550W @ 8 ohms (THD < 0.1%, 20Hz–20kHz)
Maximum single-channel output power (Dynamic-headroom IHF-A): 3400W @ 2 ohms, 1800W @ 4 ohms, 950W @ 8 ohms
Maximum single-channel output power (Continuous, 1 kHz): 2400W @ 2 ohms, 1500W @ 4 ohms, 850W @ 8 ohms
Maximum bridged output power (THD=1%, 1kHz): 3600W @ 4 ohms, 2400W @ 8 ohms
Maximum RMS voltage swing: 90.6V
Power bandwidth (THD = 1%, ref. 1kHz, half power @ 4 ohms): < 10Hz–30kHz
Voltage gain (ref. 1kHz): 32dB
Input sensitivity: +6.6dBu
THD at rated output power (MBW = 80 kHz, 1 kHz): < 0.03%
IMD-SMPTE (60 Hz, 7 kHz): < 0.1%
DIM30 (3.15 kHz, 15 kHz): < 0.05%
Maximum Input Level: +21 dBu (8.69 Vrms)
Crosstalk (ref. 1 kHz, at rated output power) < -80 dB
Frequency Response (ref. 1 kHz 10Hz–40 Hz (±1 dB)
Input Impedance (active balanced): 20 kOhm
Damping Factor (1 kHz): > 300
Slew rate: 30 V/ ?s
Signal-to-noise-ratio amplifier (A-weighted): >110 dB
Output noise (A-weighted): < -71dBu
Output stage topology: Class H
Power consumption (1/8 maximum power @ 4 ohms): 850W
Protection: Audio limiters, high temperature, DC, HF, Back-EMF, peak current limiters, inrush current limiters, turn-on delay
Cooling: Front-to-rear, 3-stage fans
Ambient temperature limits: 40°—105–F
Safety Class: I
Dimensions: 483mm W x 88.1mm H x 421.5mm D
Weight: 39 lb.
Signal processing: LPN, switchable