Enttec ODE Mk2 with POE

ArtNet/ DMX converter, 1 Universe

The ODE - Open DMX EtherNet Interface is an ArtNet to DMX 512 converter for a Universe. It works bi-directional and can also be used as a DMX 512 to ArtNet converter.
It is ideal for converting ArtNet from lighting consoles or lighting control software into conventional DMX. The combination of two ODEs is also suitable for installations or for bridging long cable distances. The DMX signal is converted to ArtNet and can therefore be transmitted via standard network cables, for example in building installations. At the other end the signal is then converted back to DMX using a second ODE.

New for the MK2 version

Thanks to the integrated web server, the new ODE Mk2 version offers additional advantages such as simple configuration via a web browser. In addition, protocols such as ArtNet 1/2/3, sACN, ESP and RDM over EtherNet are now also supported. ODE Mk2 can be addressed in both broadcast and unicast mode and supports both LTP and HTP merge.

Features:

• 10/100 Ethernet port
• 1 input & 1 output connector (not simultaneously usable)
• Status, Direction, and Link LEDs
• Ethercon connection
• Can be used as DMX output for software or lighting consoles
• Can be used as DMX input for MediaServer or visualizations
• Standardized ArtNet or ESP standard
• 10/100 Mbit data transmission
• remote programming
• Compatible with Mac & PC
• Configurable static IP address
• Optional Software NMU
• Directly compatible with ArKaos LED Mapper via ArtNet
• Directly compatible with LSC Clarity via ArtNet
• ARM 32-bit processor control via the free software tool "NMU" processor
• Firmware upgradeable
• PoE = Power over Ethernet