Laserworld Tarm 2.5

The tarm 2.5 show laser projector is a full color whitelight RGB laser systems with full analog color modulation and diode-only equipment. The guaranteed output power is specified at 2'700 mW after optics.

The benefits include:

• 2'700 mW guaranteed output power
• a very fast maximum scan speed of 45 kpps@8° ILDA for graphics projection
• high-precision diode arrays provide an excellent beam divergence of less than 1.0 mrad for a low beam diameter
• pure diode laser
• novel method for increasing the beam precision of the single-mode diodes
• beautiful colors and good color fading
• the tarm 2.5 impresses with a very bright 638 nm single mode red
• trim pots for adjusting color intensity

The tarm two laser has great beam specifications with a diameter of ca. 3.5 mm and a beam divergence of approx. 0.9 mrad (full angle).
It is equipped with a bright red (750 mW / 638 nm), a green (700 mW / 520 nm), and a blue (1'500 mW / 450 nm) diode laser source.

The scanners are very fast with 45 kpps@8° ILDA standard and allow for a maximum scan angle of 45° (@30 kpps). Thus they are well graphics capable and suitable for professional laser applications.
Optionally as upgrade available: CT-6210H scanners incl. RTI RayScan driver with 60 kpps@8° ILDA and a max. scan angle of 68° (@35 kpps).

This show laser light can be controlled via ILDA. It has a switchable scan safety and switches for x-axis and y-axis flip. Color intensity can be adjusted with trim pots per color channel.

The housing of the tarm 2.5 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.
The mounting bracket allows for hanging and for upright mounting of the laser system.

The tarm 2.5is especially suitable for show laser applications in clubs and bars and can be used by beginners as well as professionals.
.

Additional Information

Guaranteed power at aperture:
2'700 mW

Power Red:
700 mW / 638 nm

Power Green:
750 mW / 520 nm

Power Blue:
1'500 mW / 450 nm

Beam Specifications (full angle):
ca. 3.5 mm / <1.0 mrad

Laser Sources:
Diode

Laser Class:
4

Operation Modes:
ILDA

Scanner:
45 kpps@8° ILDA; optional as upgrade: CT-6210H incl. Rti RayScan driver: 60 kpps@8° ILDA, max. 68° (@35 kpps).

Scan Angle max.:
max. 45° (@30 kpps)

Accessories:
power cable, manual, key, interlock connector

Power Supply:
85 V - 250 V / AC

Power Consumption:
100 W

Dimensions:
220 / 220 / 150 mm

Weight:
7 kg