Schaller Oyster Piezo-Element&Klinke Einzel-PU für Außenmontage

The Schaller Oyster Piezo Pickup is an element and latch single adhesive pickup for alternative amplification. Schaller's patented Oyster pickups offer a natural and powerful reproduction of the instrument sound without active circuits or preamps. The excellent sound result is achieved by a perfect interaction of diaphragm, piezo element and plastic contact. All Oyster models feature a double-sided adhesive film with a removable gluing pad that will not damage the instrument cover.

For guitars with a very good resonance Schaller recommend the thin adhesive pads. The use of silicone rubber is ideal if very high volume levels are desired. Procedure: cut off about 2cm adhesive, remove the protective film and the mass press a round with the underside of the pickup on the guitar.

Recommended installation: Since resonance and construction guitars are different, this is to find the best position for the pickup on your actual instrument. Three methods commonly used in practice: Among the strings, in front of the bridge, 2 to 3 treble string; Directly on the treble of the web; Behind the bridge, treble.

For versions with two capsules of the second transducer is attached accordingly in the area of the bass strings. The control box should always be fixed with the already glued foil in an easily accessible place.

The main features of the Schaller Oyster Piezo Pickup include:

• Schaller's Oyster has a capacity of 74 pF. Schaller recommend a terminal impedance of at least 1 to 5 MOhm
• Degradation: Carefully lift off the pickup without pulling on the cable. Through careful rotational movements, the capsule is easier to solve. Any residuals of the adhesive foil are removed best with a little guitar polish.
• Including a high quality 1/4" jack
• Strain relief, screw grommet and belt receiver
• Professional quality
• Secure attachment
• Perfect shielding Oyster pickup make this even more valuable